42213 Sarah Way, Temecula, CA 92590,
Tel: 800-854-8530 (USA)
Mighty-1 Series Large
Digit Height, 5 or 6 Digits
Available with all Micro Series analog and digital I/O cards
measurement, control, and remote display.
"Mighty-1" Series with 1"
digits readable at up to 40 feet.
- Bright 1" LED
digits visible indoors at up to 40 feet.
enclosure for use in industrial environments.
- Universal 115 / 230
Vac power supply.
- Wide choice of
digital signal conditioners for analog meter,
counter / totalizer and timing applications.
- Choice of I/O
options for control and communications.
- Easy setup and
- Two-year warranty.
Series of large-digit displays feature 1"
(25.4 mm) high 7-segment digits
and a sealed enclosure designed to withstand harsh
industrial environments. The
1" digits are readable at up to 40 feet (12 m),
which is 79% further than maximum reading distance
of 22 feet (7 m) associated with the 0.56" (14.2 mm)
digits found in most 1/8 size digital panel meters
The Mighty-1 is
the first large-digit member of the
Micro Series, which is
available with digits heights of 0.56", 1"and
5" (14.2, 25.4 and 127 mm). All members of the
Micro series accept the same analog or digital
signal conditioner cards and the same I/O cards for
control and data communications. All offer the same
advanced software capabilities for demanding
measuring and control applications. For more
information, click on the links below:
5-Digit Analog Input Meters by Application:
DC Digital Meters: DC Volts, mV,
Digital Meters: True AC rms Volts, mV, Amps, mA.
Meters: Scalable display for signals such as 0-1 mA, 4-20 mA, 0-10 V.
Process Signal Totalizers: Totalizing for 0-1 mA, 4-20 mA or 0-10 V signals.
& Potentiometer Followers: Sensitivity to ±200 mV full
scale, 4-wire bridge connection.
Microvolt & Load Cell Meters:
Sensitivity to ±20 mV full scale, 4- or 6-wire bridge connection.
Meters: Special capabilities
for weighing applications.
Temperature Meters: Multiple thermocouple & RTD types
6-Digit Counters & Timers by Application:
Frequency & Rate Meter:
Two independent scalable pulse-input channels from
0 Hz to 1 MHz to display frequency, rate, RPM, or flow
Up/Down Totalizer (pulse
input): Two independent scalable pulse-input
channels count up or down to a preset at rates up to
1 MHz. Ideal for turbine flow meters. Scaled rate and total in same instrument.
A+B, A-B, A*B, A/B,
A/B-1 Draw Meter: Arithmetic functions (+, -, /, x) on dual channels
A & B. For example, add or subtract rates from two flow
meters for combined scaled flow or volume. Display ratio of
flow rates, RPM of rollers, or speed of moving belts.
Batch Controller (pulse input):
A low-cost controller with up to three relays for
repetitive fill operations.
Batch Controller (analog input):
Same capabilities as pulse-input batch controller, but
for 0-1 mA, 4-20 mA or 0-10 V process signals.
single-events from 1
µs to 99
hours with a timing resolution to
0.2 µs, or
accumulate multiple events to 999,999 hours.
Time Interval Meter:
Time periodic events from 1 µs to 199.99 s over a
programmed gate time up to 199.99 s with a timing resolution to 0.2 µs.
Phase Angle Meter: 20 updates per second for low frequencies,
such as AC line frequency.
A resolution of 1º, 0.1º or
0.01º is user-selectable.
Duty Cycle Meter:
Displays ON or OFF
period as a percentage of total period over a programmed
gate time from 10 ms to 199.99 s.
Scalable position or rate from quadrature shaft encoder
6-Digit Serially-Driven Remote Displays:
Micro "Mighty-1" Series
linearization: For improved accuracy, extended
measurement ranges, and special applications.
to display and log up to 31 meters on one data line, plus 33 virtual
meters with combinations of meter
Dual setpoint relay
mechanical relays or opto-isolated solid state relays for control and alarm.
Analog output option: 0-20
mA plus 10 Vdc analog outputs, isolated, linearized and scaled to display.
option: Isolated RS232 or
Low voltage power:
12-34 Vac or
10-48 Vdc operation off battery power in lieu of standard 85-264 Vac or
Mighty-1 Series Specifications
7-segment orange-red LED digits.
1.0" high x 0.56" wide (25.4 x 14.3 mm)
-99,999 (analog meters)
-999,999 (counters, timers, analog totalizers,
-999,990 (scale / weigh meter with dummy zero)
Minus sign, 2 setpoints, selectable decimal points
95-240 Vac ±10% standard, 12-34 Vac optional.
|| 95-370 Vdc standard, 10-48
|| 6 Watts
Aluminum body, plastic bezel
from front when panel mounted
0ºC to 60ºC (32ºF to 140ºF)
-40ºC to 85ºC (-40ºF to 185ºF)
"Case Dimensions & Mounting" below"
850 g (30 oz)
| Connections (power & data)
screw clamp connectors at rear of display