Electro-Numerics, Inc.
42213 Sarah Way, Temecula, CA 92590, USA

Raceclock

Tel: 800-854-8530 (USA)
Tel: 951-699-2437 
Fax: 951-695-7246

sales@electronumerics.com

    468 Series "Flip-Digit"
Presettable Up-Down Counters

 4", 6" or 9" Digit Height, 4 or 6 Digits

Readable over long distances indoors, or outdoors in bright sunlight.

  

Features

  • Count Up and Count Down
  • 4 Digits (9999) or 6 Digits (999999)
  • Large 4", 6" or 9" Digits
  • Readable up to 360 Feet (9" Digits)
  • Preset Count with Keypad Entry
  • Sealed Surface Mount Case
  • 115 Vac Power
  • 18 Month Warranty

Options

  • 24 Vdc Excitation Output (6" & 9" Models)
  • Frequency / Rate Signal Input
  • Low Temperature Operation
  • Dummy (dead) Zero
  • NEMA-4 Enclosure
  • 230 Vac or 12 Vdc Power

Description

These large digit counters are 4-digit (9999) or 6-digit (999999) digital Count Up and Count Down Counters available with 4", 6" or 9" tall flip digits and microprocessor electronics. They are ideal for viewing a count or total over a long distance. Applications include parts produced, parts on hand, crowd control, and a lot more.

Exceptional count viewing distance, even outdoors in bright sunlight, is achieved with the large, 4", 6" or 9" tall, fluorescent yellow electromagnetic flip digits.

"C" (Count) models are basic counters for counting up or down. Wiring is through a conduit box on the left side of the housing. Wire connections are provided for power, signal ground, counting up, counting down, and count reset.

"PC" (Preset Count) models further have a keypad mounted on the right side of the housing. This allows a preset number to be entered into the counter, from which the count can then be incremented or decremented, depending on whether the signal is applied to the count up or count down wires. The keypad also provides Reset, Count-Up, Count-Down keys, plus a DIN connector to accept remote accessories: Remote Pushbutton for Count or Reset inputs (PB500-X), Remote Duplicate Keypad (RK600-X), and Large Button Remote Control (RC100-X).

A sealed surface mount case provides protection for use in dirty or damp environments. Please see our Mechanical Section for dimensions. For additional protection, Model 468-4C may be ordered with a NEMA-4 rated enclosure. 115 Vac power is provided standard, with 230 Vac or 12 Vdc power optional. Counters may be specified with a decimal point if required.

An 18-Month Warranty is standard.

Specifications

  Display Configuration
  Model   Digit Height   Display
  468-4C
  468-4PC
  468-6C
  468-6PC
  467-9C
  667-4C
  667-4PC
  667-6C
  667-6PC
  667-6PC
  4"
  4"
  6"
  6"
  9"
  4"
  4"
  6"
  6"
  9"
  9,999
  9,999
  9,999
  9,999
  9,999
  999,999
  999,999
  999,999
  999,999
  999,999
  Control Inputs ("C" and "PC Models)
  Connection Method   Pigtail wire leads through conduit box
  Count-Up Input   Contact closure (N.O. switch)
  Count-Down Input   Contact closure (N.O. switch)
  Reset Input   Contact closure (N.O. switch)
  Maximum Count Rate   2 counts per second
  Keypad Unit ("PC Models)
  Location   On right side of display housing
  Functions   Present Count Input
  Count up
  Count down
  Reset (to blank display)
  Connector for Remote Units   DIN connector
  Available Remote Units   Remote pushbutton for count or reset inputs.
  Remote duplicate keypad.
  Remote with large buttons for count up,
  count down, and reset.
  Power
  AC Voltage   115 or 230 Vac 15%, 50/60 Hz
  DC Voltage   12 Vdc, 10%
  Power Consumption   200 W peak while flipping digits
  Environmental
  Operating Temperature   0 to +66C, -32 to +66C with T option
  Storage Temperature   -40 to +85C
  Relative Humidity   95% at 40C, non-condensing
  Protection   Case sealed against dust and moisture
  Accuracy at 25C
  Maximum Error   0.01% of reading 1 count
  Linearity   1 digit typical
  Span Tempco, max   0.005% of full scale (9,999) per C max
  Step Response   500 ms
  Warmup to rated accuracy   10 min
  Mechanical
  Dimensions   See Mechanical Section
  Weight   8.5 lb (3.9 kg), 4" digits
  12.5 lb (5.7 kg), 6" digits
  Case Material   Black painted aluminum, ABS back panel
  Window Material   Clear acrylic
  Connections (Power, Count,
  Reset)
  Pigtail leads via conduit box
  Mounting   Surface mount. See Mechanical Section.

  

 

Electro-Numerics Inc. Logo

Digital Panel Meters
by Series

 Micro Meter/Controllers
 DIN Digital Indicators
 Summit Low Cost Meters
 Older Digital Panel Meters
 Catalogs & Price Lists
 Meter Owners Manuals
 Micro Downloads
 Meters Inquiry & RFQ

  

Large Digit Industrial Displays

 Mighty Series (to 5" LED)
 PI Series (2" LED)
 Flip-Digit Series (to 9")

 Catalogs & Price Lists
 Large Digit Inquiry & RFQ

  

Custom Magnetic Components

 Custom Transformers
 Coils, Inductors, Toroids
 Magnetic Sensors
 Magnetics Inquiry & RFQ
  

Sports Timing
Race Clocks
(to 9")

 LM Series, Flip-Digit
 XL Series, LED, Domestic
 XLC Series, LED, Int'l
 Mile-Marker 6" Raceclock

 Printing Race Timers
 Serial Remote Displays
 Raceclock Accessories
 Raceclock Dimensions
 Catalogs & Price Lists
 Sports Timer Inquiry

  

Information about Electro-Numerics

 Electro-Numerics Home
 About Electro-Numerics
 Electro-Numerics News
 General Inquiry

 Sitemap

 

 

Electro-Numerics, Inc., 42213 Sarah Way, Temecula, CA 92590, USA
Tel: 800-854-8530 (USA), 951-699-2437;  Fax: 951-695-7246;  sales@electronumerics.com